EPS-AC

Main Features:

• IMS Mosfet Technology • High Frequency Noiseless Switching • Microprocessor Based Technology • Sensor Calibration through digital console • Sensor Error Detection • Thermal Protection • Start Sequence • RS 232 Serial Link • Can Bus • Flash Memory • E-Eprom • LED with flash coded fault messages • Logbook for recording alarms • Adjustments through digital console connected to RS 232, (or through a computer WIN software) • Gauge Indicator Output • Protected against reversed battery polarity • Protected against shorts to + or - battery • Internal Safety Relay • Protection: IP64 • Security in accordance with European CE Standards

Technical Specification:	24/36V	48V	48/80V
PN (W)	250/900	250/1000	250/1000
VBATT (V)	24/36	48	48/80
IN (ARMS)	40	30	22
IMAX (ARMS)	70	70	50
DIM(mm)	210x150x74	210x150x74	210x150x74
Freq. (Hz)	20/150	20/150	20/150
Suggested Speed (RPM)	2850	2850	2850
Rated Torque (Nm)	3	3	3
Max Torque (Nm)	5.5	8	8
Gearbox Ratio	46:1	46:1	46:1
Handle Command	Tach/Pot/Enc	Tach/Pot/Enc	Tach/Pot/Enc
Shaft Speed Sensor	Not Required	Not Required	Not Required
Wheel Position Sensor	Not Required	Not Required	Not Required
Stand Still Torque	Yes	Yes	Yes
Gauge Input Output	Yes	Yes	Yes